Woodworking Materials, Supplies, and Tools from Cherry Tree Toys


Aluminum Oxide Point 1/8" Taper

(No reviews yet) Write a Review
Item usually ships within 24 hours
0.01 LBS


Aluminum Oxide Point 1/8" Taper

Move up to an Aluminum Oxide Mounted Point 1/8" Taper carving stone that cuts faster. The Mounted Point carving stone is good for rounding edges and surface finishes, or hard-to-reach difficult tight, and narrow angels. Use a coarse grit for general shaping and delicate texturing and fine grit for smoothing and texturing soft carving woods.

The carving stone holds its shape extremely well. Grits are identified by color. Coarse is red which aggressively removes tough materials such as steel and pliable iron. Fine is white for extremely fine cutting and high finish on hard materials including gemstones, stainless steel, and glass. Use the carving stone for medium to fine finishing with subtle texture or mini carvings with basswood and other softwood projects.

You can use the Aluminum Oxide Point 1/8" Flat Top Taper with Foredom, Dremel, and other power rotary tools. The Aluminum Oxide Mounted Point Taper carving stone works great for all your detailing projects.

Aluminum Oxide Point 1/8" Taper Specifications

  • 1/8" diameter head x 13/32" long head.
  • Coarse (Red)120 grit.
  • Fine (White) 400 grit.
  • 1/8" Shank.
  • Mounted Point Flat Top Taper.
  • The total length of Carbide Bur including shank and head about 1-7/8".
  • Maximum Speed of 35,000 rpm.
  • Made in the USA.

Use the Aluminum Oxide Point 1/8" Taper to remove:

  • Steel.
  • Malleable Iron.
  • Gemstone.
  • Glass
  • Porcelain.
  • Soft Wood.
View AllClose