Woodworking Materials, Supplies, and Tools from Cherry Tree Toys

Delise Carving

Chickadee Cast Feet

(No reviews yet) Write a Review
This item usually ships in 24 business hours.
0.10 LBS
  • A pair of Chickadee Cast Feet shown from a left angle
  • Chickadee carving feet.
  • This is the back view of the chickadee and warbler feet.
  • Showing the front toes on the cast feet.
  • A view from the  top profile on the carving cast feet
  • The chickadee feet lying on the side of a block of wood.

Currently Out of Stock


Chickadee Cast Feet Make your carving or taxidermy piece come to life with these "life size" Chickadee feet. The chickadee cast feet are made of a mixture of pewter and tin forming a replica of real chickadee bird feet. 

You will be impressed by the intricate detail of the legs and feet that will make your carving look more realistic than ever before.

Chickadee Cast Feet Specifications:

  • Delise Feet originals.
  • Made in the USA.
  • Sold by the pair. (one left and one right to fit one full size chickadee).
  • Full Size.

From the tip of the front toe to the tip of the back to is 1 1/8" long. From the bottom of the foot to the top of the leg tenon is about 1 1/16" high. Each foot is about 7/16" wide.

There are 4 toes. Three to the front and one to the back. There is a tenon on the bottom of each foot that is about 1/8" in diameter and 3/8" long.  This tenon can be used to mount the bird and feet onto a surface, like a branch or may be clipped off if not needed. The top of the leg is about 1/8" in diameter.

Tips for Installing Chickadee Cast Feet:

  1. Drill holes in the bird to attach the legs and feet.
  2. The legs do have a left and a right. 
  3. If you look carefully at the top of the leg, they will be marked. 
  4. Also remember that the hind toe goes to the inside of the bird.
  5. Attach the legs using an epoxy.
  6. If you want to bend the feet or legs, GO SLOW!
  7. Use a hair dryer to heat them and slowly bend them into position.
  8. You can also use a file and notch them from the under side of the knuckles to bend them around.  Be careful because the chickadee cast feet are very small and can break easily.
  9. Reinforce the bent feet with a little super glue or apoxie sculpt. To blend the legs from the body of the chickadee, use a little Apoxie Sculpt to create a feather formation that looks for natural.
  10. Clean the legs and feet with vinegar or denatured alcohol before painting them.

Chickadee Cast Feet also fit the following birds: 

  • Warbler.
  • Barn Swallow.

While these feet were made by Richard Delise to replicate those of a life size chickadee, there are many other birds that have feet that are very similar or almost identical. 

You can use these feet for Warbler cast feet or Barn Swallow Cast Feet. If you want to slightly alter the feet without making your own, simply add a little Apoxie sculpt to make areas thicker or bolder according to the bird you are trying to make. 

View AllClose

Warranty Information

While this item is cast in excellent quality pewter and tin. There are no warranties because of the nature of the product. Please inspect the cast feet immediately upon arrival for any breakage or defects and contact us within 7 days of receiving your item. Please include any package information such as damage to the package upon arrival of your items.
View AllClose