Dura-Grit 1/2" Hollow Tip Burr 60 Grit

The 1/2" Hollow Tip Burr 60 Grit is a truly superior sanding band and a very useful hole saw sander. 'Saw' a hole into a piece of material and move laterally to open up an irregular cavity or hole. Sanded finish as it cuts! Dura-Grit is very strong. Won’t shatter.

This bur won’t fly apart like ordinary sanding bands, won’t tear loose, and produces clean-edged, fast-cut holes. The burr can be mounted on an extra strong, steel mandrel that can be moved to enlarge holes or create irregular cavities. Dura-Grit is the perfect tool for woodworkers, do-it-yourselfers, and anyone who needs to quickly open up an irregular cavity or hole.

Recommended Applications For Dura-Grit 1/2" Hollow Tip Burr 60 Grit

The Burr is a versatile tool that can be used for a variety of applications. Sanding the surfaces of wood carvings, models, and gourds, Hollow Tip Burr provides a smooth, refined finish. It can also be used to smooth wood panel edges and hole saw into cabinet backs to enlarge holes to accommodate water and waste pipes.

Additionally, the Hollow Tip Burr can be used to grind the edge of ceramic wall tile to accommodate waste pipes and water pipes or trim/fit ceramic tile edges around awkward protrusions. Furthermore, it can be used to start from the soft, back of a wall tile and drill through to the front, to create a hole for a water pipe.

Finally, the Hollow Tip Burr can also be used to create lightning holes in RC aircraft structures or ‘ease’ edges - to fit, just about any material sheeting. You can bevel wood and carbon fiber dowels and sheeting, plastic plumbing pipes, rubber hose, etc. Make corner ‘cut to’ holes when cutting out air register apertures in the laminate floor.

Dura-Grit 1/2" Hollow Tip Burr 60 Grit Specifications

• 1/2 inch diameter
• 1/8 inch shank
• 60 Grit

Order your Hollow Tip Burr today!