Flexcut Deluxe Power Gouge Set

Flexcut 14 pc. Power Gouge Set

 If you like carving then the Flexcut 14 pc. Gouge set is an outstanding purchase! The Flexcut  14 pc. Power Gouge Set is used mainly for roughing out and fine detailing smaller edge profiles with razor sharp blades. The Flexcut  power gouge set fits Ryobi, Auto Mach, Proxxon, even flexible shaft  reciprocating carvers. These gouges, v-gouges, veiners, are packed in a wooden box and Made in U.S.A. You can maintain your Flexcut gouge set by polishing with a power strop. You'll enjoy the speed and ease of the Flexcut Power Gouges!

Flexcut 14 pc Power Gouge Set Includes:

• RG-309, #11 x 1/8"(3mm).
• RG-402, #8 x 3/8" (10mm).
• RG*302, #9 x 1/2" (12mm).
• RG-307, 70° x 1/4" (6mm).
• RG-403, 70° x 3/8" (9mm).
• RG-203, 90° x 11/16" (18mm).
• RG-305, #3 x 3/8" (9mm).
• RG-400, #3 x 5/8" (16mm).
• RG-300, #3 x3/4" (19mm).
• RG-200, #3 x 1" (25mm).
• RG-306, #6 x 5/16" (8mm).
• RG-401, #5 x 9/16"(14mm).
• RG-301, #5 x 5/8"(16mm).
• RG-201, #5 x 7/8" (22mm).
• First Aide Kit.

Flexcut 14 pc. Power Gouge Set :

• Made in U.S.A.
• Comes in Wooden Box.
• Handle & Adapter Sold Separately.

Flexcut 14 pc. Power Gouge Set Fits:

• The Foredom Repciprocating Handpiece H.50 or H.50C will accept the full range of Flexcut RG Power gouges.  You may also use the quick connect power handle for some hand carving.
• 
   
• The WeCheer Reciprocating Handpiece will accept all the Flexcut Power Gouges.  You may also use the Flexcut SK109 adapter to use the Flexcut SK range on any of the reciprocating handpieces.
• 
• The Proxxon Detail Carver is a self contained tool that easily accepts all the Flexcut Power Gouges and with the Flexcut SK109 adapter you can use all the SK range gouges also.
• 
• The Flexcut Power Gouge Handle can also be used.  Turn all your Flexcut Power gouges into working hand gouges for the fine details.  Get simply the best of both worlds!
• 
   
   
• The Automach HCT-30 Detail carver will accept both the Flexcut power gouges and the Flexcut SK range of gouges.  The SK gouges will require the Flexcut SK109 adapter.   To use the Flexcut RG Power Gouges you will need the Flexcut RG 103 Shim Pack for the Automach to operate properly.
• 
   
  Not sure which profile you want?  Here are all the Flexcut Power Gouge profiles and sizes.