Foredom H.8 Handpiece Collet Style
- 0.46 LBS
- Handpiece Style:
- Key Tip
Join the new level of power and performance with the Foredom H.8 Handpiece. This iCollet Style handpiece is slender with a comfortable design that contains a tapered grip. The Foredom H.8 Handpiece is one of the most popular handpieces that works with different size accessories using a wide range of applications which accommodates up to 1/8" diameter shank.
Foredom H.8 Handpiece Includes:
- Two Collets; 3/32", 1/8".
- Pin and Chuck Wrench.
- Pre-lubricated Ball Bearings.
- Adapts to larger accessories.
The Foredom Handpiece features which makes it totally easier and faster to interchange handpieces to any collet style Foredom Flex Shaft machine, except heavy duty models. You can use the interchangeable handpiece with a wide variety of shanks increasing versatility suitable for continuous use.
Use the Foredom handpiece without worries of lubrication because it's made with pre-lubricated ball bearings requiring no maintenance. Bring your carving to a higher degree with the Foredom H-28 Handpiece! This Foredom handpiece fits general purpose, quick change, special use , duplex spring, and chisel flex shaft handpieces.
Foredom H.8 Handpiece Specifications:
- Model H-8.
- 8" long.
- 23/32" diameter (center).
- 1/2" (taper).
- Slim Collet Style Handpiece.
The general purpose collet style Handpiece is an amazing attachment for your Foredom flexible shaft tool! It is important to check the sheath and shaft tip and properly adjust them before attaching this handpiece to your Foredom flexible shaft tool.
The tip of the flexible shaft should extend 3/4″ beyond the end of the sheath. This adjustment is made by loosening the set screw in the motor connector and moving the sheath in or out while the motor and shaft and sheath are hanging fully extended or laying on a flat surface.
When the shaft is adjusted correctly, tighten the set screw in the motor connector. The Handpiece is going to make your work easier, faster and more precise!
The Slender H.8 with chuck guard sleeve comes with 2 collets and accepts accessories with shanks up to 1/8″.