Mockingbird Cast Feet

Make your carving or taxidermy piece come to life with these "life size" Mockingbird feet.  The Mockingbird feet are made of a mixture of pewter and tin forming a replica of real Mockingbird feet.  You will be impressed by the intricate detail of the legs and feet that will make your carving look more realistic than ever before.

Mockingbird Cast Feet Specifications:

• Delise Feet originals.
• Made in the USA.
• Sold by the pair. (one left and one right to fit one full size Mockingbird).
• Full Size.
• From the tip of the front toe to the tip of the back to is 1 3/4" long.
• From the bottom of the foot to the top of the leg tenon is about 1 5/8" high.
• Each foot is about 5/8" wide.
• There are 4 toes.  Three to the front and one to the back.
• There is a tenon on the bottom of each foot that is about 1/8" in diameter and 3/8" long.  This tenon can be used to mount the bird and feet onto a surface, like a branch or may be clipped off if not needed.
• The top of the leg is about 1/8" in diameter.

Tips For Installing Mockingbird Cast Feet:

• Drill holes in the bird to attach the legs and feet. 
• The legs do have a left and a right.  If you look carefully at the top of the leg, they will be marked.  Also remember that the hind toe goes to the inside of the bird.
• Attach the legs using an epoxy.
• If you want to bend the feet or legs, GO SLOW!  Use a hair dryer to heat them and slowly bend them into position.
• You can also use a file and notch them from the under side of the knuckles to bend them around.  Be careful because the Mockingbird feet are small and can break easily.
• Reinforce the bent feet with a little super glue or apoxie sculpt.
• To blend the legs from the body of the house wren, use a little Apoxie Sculpt to create a feather formation that looks more natural.
• Clean the legs and feet with vinegar or denatured alcohol before painting them.