Ram 45,000 RPM Hand-Piece with 3/32" Collet
- 0.70 LBS
Are you in the market for a Ram 45,000 micro motor handpiece with a 3/32" collet? Then read on, because this is the perfect tool for you!
This powerful little micromotor can reach speeds of up to 45,000 RPM and comes with an improved dust seal that keeps your work area clean. It also has grease-sealed bearings for a smoother operation. Plus, you can choose to add 1/8” or 3mm chuck sizes.
This hand-piece features a twist-type release which allows you to change burs without tools. Simply twist the center upper center section to secure or release your bur.
What comes with the Ram 45,000 handpiece with a 3/32" collet?
- You get the 45,000 rpm handpiece including a 6' power cord.
- An extra pair of brushes.
- Wrenches for changing the collet.
How does this handpiece run?
You'll still need a controller unit. This handpiece can replace an old handpiece or you can utilize more than one. A lot of people have one that has a 1/8" collet in it and the other that has a 3/32". This allows them to move between burrs with different shanks without having to change collets. You can plug and unplug each of the handpieces from your control unit or you can get a Ram dual output box and plug two units into it and change between the units with the flick of a switch.
What do you need to make this thing work?
To operate any of the Ram handpieces you need a control unit. If you're looking to purchase a Ram for the first time, go ahead and go with a Ram 45 Unit complete with a control unit. If you already have a control unit, you can easily plug this handpiece with a 3/32" collet in and you will be up and running.
Specs for the Ram 45,000 handpiece with 3/32" Collet
Take a look at the Ram 45,000 handpiece. This tool includes a 3/32" collet, and it offers a torque of 4.5 Ncm. It also has a size of 6.16” x 1.2” and a net weight of 8oz.
What's the difference between a handpiece with a 3/32" collet vs a 1/8" collet?
This may seem simple but, if you don't have a lot of experience it can be confusing. The 3/32" collet accepts burs with a 3/32" shank. You can get a collet adapter to go down to 1/16". You can also change the collet out on this unit to a 1/8" collet to use burrs with a 1/8" shank like the Dremel bits.
The Ram 45,000 handpiece with a 3/32" collet is a versatile tool that can be used for a variety of tasks. Carvers will appreciate the power and precision of this tool, while hobbyists will find it to be a useful addition to their arsenal. General users will find that the Ram 45,000 handpiece is a reliable and easy-to-use tool that can tackle a variety of projects.
So if you're looking for a versatile and powerful micromotor hand-piece, the Ram 45,000 is the perfect choice for you!