Standing Teal Feet

Make your carving or taxidermy piece come to life with these "life size" Standing Teal Feet.  The teal cast feet are made of a mixture of pewter and tin forming a replica of real feet.   You will be impressed by the intricate detail of the legs and feet that will make your carving look more realistic than ever before.

Floating Standing Teal Feet Specifications:

• Delise Feet originals.
• Made in the USA.
• Sold by the pair. (one left and one right to fit Standing Teal) .
• Full Size.
• From the tip of the front toe to the tip of the back is 3" long.
• From the bottom of the foot to the top of the leg tenon is about 2" high.
• Each foot is about 2 1/2" wide.
• The front 3 toes have webbing in between each toe.
• Three to the front and one to the back.
• There is a tenon on the bottom of each foot that is about 1/4" in diameter and 1/2" long.
• This tenon can be used to mount the bird and feet onto a surface, like a branch or may be clipped off if not needed.

Tips for Installing Standing Teal Feet:

1. Drill holes in the bird to attach the legs and feet.
2. The legs do have a left and a right.
3. If you look carefully at the top of the leg, they will be marked.
4. Also remember that the hind toe goes to the inside of the bird.
5. Attach the legs using an epoxy. If you want to bend the feet or legs, GO SLOW!
6. Use a hair dryer to heat them and slowly bend them into position.
7. You can also use a file and notch them from the under side of the knuckles to bend them around.
8. Be careful because the Standing Teal cast feet can break easily.
9. Reinforce the bent feet with a little super glue or apoxie sculpt.
10. To blend the legs from the body of the Standing Teal, use a little Apoxie Sculpt to create a feather formation that looks for natural.
11. Clean the legs and feet with vinegar or denatured alcohol before painting them.

While these feet were made by Richard Delise to replicate those of a life size Standing Teal, there are many other birds that have feet that are very similar or almost identical. 

If you want to slightly alter the feet without making your own, simply add a little Apoxie sculpt to make areas thicker or bolder according to the bird you are trying to make.