MSRP:
Now:
$1.59
Was:
— You save
Frequently bought together:
Description
These brass tubes are used inside the propellor hubs as a shaft way to create the spinning of the whirligig. The brass screws are inserted through these and attached to the body of whirligig. Most whirligigs will need two of these.
Whirligig Brass Propellor Tube Specifications:
- Outside diameter 1/4 inches.
- 13/16” long.
- Inside diameter of .192 inches.
- Brass Tubing.
Related Products

Cherry Tree Toys
MSRP:
Now:
$1.89
Was:
Use the brass pivot tube inside the pivot block to make your whirligig turn in the wind. The brass tube allows the whirligig to turn freely without binding or wear on the wooden whirligig parts...
916

Whirligig Brass Drive Shaft Tube
Cherry Tree Toys
MSRP:
Now:
$2.79
Was:
Slide your whirligig drive shaft in a brass drive shaft tube. The drive shaft tubes protect your whirligig shafts and keep them moving freely.
Whirligig Drive Shaft Tube...
917


Cherry Tree Toys
MSRP:
Now:
$2.99
Was:
Make your own whirligigs with the right parts. We offer brass tube that you can cut yourself to make the tubes for whirligigs. Brass can be cut on your regular saw with ease or use a...
927
Customers Also Viewed


Cherry Tree Toys
MSRP:
Now:
$2.99
Was:
Make your own whirligigs with the right parts. We offer brass tube that you can cut yourself to make the tubes for whirligigs. Brass can be cut on your regular saw with ease or use a...
927

Cherry Tree Toys
MSRP:
Now:
$1.89
Was:
Use the brass pivot tube inside the pivot block to make your whirligig turn in the wind. The brass tube allows the whirligig to turn freely without binding or wear on the wooden whirligig parts...
916

Whirligig Brass Drive Shaft Tube
Cherry Tree Toys
MSRP:
Now:
$2.79
Was:
Slide your whirligig drive shaft in a brass drive shaft tube. The drive shaft tubes protect your whirligig shafts and keep them moving freely.
Whirligig Drive Shaft Tube...
917

Cherry Tree Toys
MSRP:
Now:
$2.89
Was:
Brass Pivot Bearing 1/4"
Sold in packages of 20.
1/4” bearing
Solid Brass.
Use this bearing above the pivot nail to make the whirligig pivot towards the wind.
909

Cherry Tree Toys
MSRP:
Now:
$4.49
Was:
#9 Brass Screw
2" longShank length may vary.
Sold in Packages of 6.
Use these screws to attach the whirligig hubs on when creating your whirligig. They fit perfectly inside the whirligig...
907

Cherry Tree Toys
MSRP:
Now:
$1.89
Was:
Get your whirligigs off to the right star. Use a stainless steel pivot nail to set your whirligig on and make it move with the wind. The pivot nail can be attached to a board, deck railing or other...
918

Whirligig Counter Clockwise Hub
Cherry Tree Toys
MSRP:
Now:
$1.39
Was:
3/4" x 3/4" x 3"
Whirligig Hub
2 blade slots to accommodate 5/32” marine grade plywood.
This hub is designed to rotate in a counter clockwise fashion. If the hub unscrews, you have it...
932