Statue Of Liberty Clock Pattern

France presented the United States with the Statue of Liberty as a gift of friendship.  Prepare your scroll saw and get it ready to stack cut this  Statue Of Liberty Clock Pattern. There are six desktop designs with this pattern, three with clocks and three without, two have the Statue of Liberty standing holding the torch, and the other four have the upper portion of the Statue  with the rippling flag behind the Statue.

 Finished Statue Of Liberty Measurements

• Large with clock - 11 inches high x 6 1/4 inches wide.
•  Takes a 2 inch clock insert with a clock insert with a 1 7/8 inch hole.
• Base - 2 inches wide x 7 1/2 inches long.
• Large without clock - 11 inches high x 4 inches wide.
• Base - 1 1/2 inches wide x 4 1/2 inches long.
• Medium with clock - 7 1/2 inches wide x 8 1/4 inches high.
• Takes a 2 inch clock insert with a clock insert with a 1 7/8 inch hole.
• Base - 2 1/4 inches wide x 9 1/2 inches long.
• Medium without a clock - 8 inches wide x 9 inches high.
• Base - 2 1/2 inches wide x 11 inches long.
• Small with a clock - 6 inches wide x 6 1/2 inches high.
• Takes a 1 7/16 inch clock insert needs a 1 3/8 inch hole size.
• Base - 2 1/4 inch wide x 7 1/2 inches long.
• Small design without the clock - 6 inches wide x 6 1/4 inches high.
• Base - 2 1/4 inches wide x 7 1/2 inches long.

Wood Requirement: 1/4 inch thick material for each layer base made with thicker wood than design.

This scroll saw pattern is full size.  You will receive the plan printed on five 11" x 17" sheets of paper.  We recommend that you make a copy to scroll saw out and use the original for reference.