Victory USA Scroll Saw Pattern

Proud to be an American? Then you will enjoy scroll sawing this Victory USA Scroll Saw Pattern. This piece has an eagle scroll sawn in the middle with the star scroll sawn at the bottom. This particular plan can be made a couple of different ways. Make it as a wall plaque with or with out a clock insert. And also make it with a base to set it out on your desk or table with or with out a clock insert.

The wall plaque will measure 9 inches wide x 8 inches long.  Recommend wood is 1/4 inch thick to 5/8 inch thick.  The desk version will measure 7 inches wide x 5 3/4 inches long and the base will measure 4 1/2 inches long x 2 1/2 inches wide.  Recommend wood is 3/8 inch thick to 3/4 inches thick for the plaque and 1/2 inch thick to 3/4 inch thick for the base. If you would like to add a clock insert it is recommended that you use a 1 7/16 inch clock insert.   

This scroll saw pattern is full size.  You will receive the plan printed on paper.  We recommend that you make a copy to cut out with your scroll saw and use the original for reference.