Country Western Guitar Clock Pattern

This pattern screams country and western!  There is a cowboy hat with a clock insert below it, a guitar, and a bandana stretched across the top of the design. All three items are grouped together and resting on a wooden desktop base.  There are two sizes on this pattern for you to cut out, a large and a small. 

(Note - the large cutout takes a 2 1/4" clock insert that is no longer available. You can adjust the hole size to 1 7/8 to use a 2 inch clock insert that we do carry.)

Finished Country Western Guitar Clock Specifications:

• Large desktop version - 12 inches wide x  8 1/2 inches high.
• Base - 11 1/2 inches long x 2 1/4 inches wide.
• Bandana - 10 1/2 inches wide x 5 1/2 inches high.
• Guitar - 4 inches wide x 8 1/2 inches high.
• Hat - 4 3/4 inches wide x 5 1/4 inches high.
• Clock Insert - Uses 2 1/4 inch insert with a 2 1/8" hole , or you can adjust hole size to 1 7/8" to fit a 2" clock insert.
• Small desktop version - 7 3/4 inches wide x 5 1/2 inches high.
• Base - 7 1/2 inches long x 2 1/4 inches wide.
• Bandana - 6 3/4 inches wide x 3 1/2 inches high.
• Guitar - 2 1/2 inches wide x 5 1/2 inches high.
• Hat - 3 1/2 inches wide x 3 1/2 inches high.
• Clock Insert - 1 7/16 inch insert needs a 1 3/8 inch hole size with 7/32 inch mounting depth. 

 Wood requirement: 1/4 inch wood for each layer of this design.  3/4 inch thick wood for the base.

This scroll saw pattern is full size.  You will receive the plan printed on two 11" x 17" sheets of paper.  We recommend that you make a copy to scroll saw out and use the original for reference.