Woodworking Materials, Supplies, and Tools from Cherry Tree Toys

Delise Carving

Roadrunner Cast Feet

(No reviews yet) Write a Review
This item usually ships in 24 business hours.
0.10 LBS
  • The Roadrunner Cast Feet are shown on a block of wood at a right angle.
  • A front view of the Roadrunner cast feet.
  • Road Runner Carving Feet.
  • A view from the back of the Road Runner Cast Feet.
  • Road Runner Cast Feet showing the tenons under the feet.


Roadrunner Cast Feet Make your carving or taxidermy piece come to life with these "life size" Road Runner feet. The Road Runner carving feet are made of a mixture of pewter and tin forming a replica of real road runner bird feet.

You will be impressed by the intricate detail of the legs and feet that will make your carving look more realistic than ever before.

Roadrunner Cast Feet Specifications:

  • Delise Feet originals.
  • Made in the USA.
  • Sold by the pair. (one left and one right to fit one full size road runner).
  • Full Size.
  • From the tip of the front toe to the tip of the back to is 3 1/8" long.
  • From the bottom of the foot to the top of the leg tenon is about 3 1/2" high.
  • Each foot is about 1 1/16" wide.
  • There are 4 toes.Two to the front and two to the back.
  • There is a tenon on the bottom of each foot that is about 1/4" in diameter and 3/4" long.
  • This tenon can be used to mount the bird and feet onto a surface, like a branch or may be clipped off if not needed. The top of the leg is about 1/4" in diameter.
  • These legs have wire reinforcements inside the legs.

Tips for Installing Road Runner Cast Feet:

  1. Drill holes in the bird to attach the legs and feet.
  2. The legs do have a left and a right. 
  3. If you look carefully at the top of the leg, they will be marked. 
  4. Also remember that the larger front and hind toe goes to the inside of the bird.
  5. Attach the legs using an epoxy.
  6. If you want to bend the feet or legs, GO SLOW!
  7. Use a hair dryer to heat them and slowly bend them into position.
  8. You can also use a file and notch them from the under side of the knuckles to bend them around. 
  9. Be careful because using excess force will make them break.
  10. Reinforce the bent feet with a little super glue or apoxie sculpt.
  11. To blend the legs from the body of the road runner, use a little Apoxie Sculpt to create a feather formation that looks for natural.
  12. Clean the legs and feet with vinegar or denatured alcohol before painting them.
  13. The Roadrunner carving feet can also be used as study casts to follow when building your own feet for your road runner.
View AllClose

Warranty Information

While this item is cast in excellent quality pewter and tin. There are no warranties because of the nature of the product. Please inspect the cast feet immediately upon arrival for any breakage or defects and contact us within 7 days of receiving your item. Please include any package information such as damage to the package upon arrival of your items.
View AllClose