Tiny Inverted Cone Carbide Bur

If you're looking for a specialized tool to enhance your work on feather barbules or hair, the inverted cone is a versatile choice. It's designed to create V-shaped cuts with precision, resulting in smooth, polished surfaces on a range of materials.

 Whether you're a seasoned wood carver or a beginner looking to add some detail to your pieces, inverted cones are a great option. And, with high durability, these long-lasting bits are nearly as tough as carbide-point bits, so you can use them again and again with confidence.

If you're in search of precision in your carving work, the Tiny Inverted Cone Carbide Bur might just be the tool for you. Measuring at a mere 2.1mm at the base and 2.4mm at the top of the head, this bur offers accuracy that larger tools may lack.

With a 3/32 shank size and a total length of 38.7mm, you can be sure you will have the control necessary to perform even the most delicate procedures. 

So why not give an inverted cone a try and see the difference it makes in your work?

Tiny Inverted Cone Carbide Bur Specifications

• This Tiny Inverted Cone Carbide Bur is diamond cut.
• The Tiny Inverted Cone Carbide Bur is 2.1mm at the bottom and 2.4mm at the top of the head.
• Its head length is 3.0mm and has a 3/32 shank size 
• The total length of the bur including the shank is 38.7mm

Bur Maintenance

Maintaining your burs is essential to ensure they remain sharp, efficient and work optimally. One of the easiest things you can do to maintain your burs is to store them safely in a holder or box.

This prevents them from knocking into one another and becoming damaged. When using your burs, apply just enough pressure to get the job done without burning the bits. Overheating them can cause them to become brittle and snap.

Cleaning your carbide-point bits with a brass brush will prevent them from  clogging, while a wet white stick can be used to clean diamond bits. A neoprene rubber bar works wonders in removing dust from ruby bits, stones, and sanding discs.

Lastly, a diamond hone or dressing stone can reshape and clean stones for optimal performance. With a little care and attention, your burs will last longer and perform better, saving you time and money in the long run.