MSRP:
Now:
$3.49
Was:
— You save
Description
#18 Stainless Steel Nail 1 1/8" L
The #18 Stainless Steel Nail 1 1/8" Long are slender with around type head and are used as a finishing nail. These nails hold better becuase of the way the shank pushes the wood aside then springs back up and grips.
Package of 50.
Related Products
Currently Out of Stock

#18 Stainless Steel Nail 5/8"L
Cherry Tree Toys
MSRP:
Now:
$3.49
Was:
#18 Stainless Steel Nail 5/8"L
the #18 Stainless Steel Nail 5/8"L with around type head and are used as a finishing nail. These nails hold better becuase of the way the shank pushes...

#18 x 7/8" Stainless Steel Nail
Cherry Tree Toys
MSRP:
Now:
$3.49
Was:
#18 x 7/8" Stainless Steel Nail
#18 x 7/8" Stainless Steel Nail with around type head and are used as a finishing nail. These nails hold better becuase of the way the shank pushes the wood...

1 1/8" Forstner Bit
Cherry Tree Toys
MSRP:
Now:
$10.95
Was:
1 1/8" Forstner Drill Bit
For drilling clean, accurate holes every time.We recommend use of a drill press with any forstner bit to ensure accuracy and for your safety.
Our forstner bits are made...

SaburrTooth 1/8" Ball Nose Burr Coarse 1/8" Shank
Saburrtooth
MSRP:
$16.94
Now:
$16.75
Was:
The green SaburrTooth 1/8" x 7/8" Ball Nose Coarse 1/8" Shank, features a unique open pattern with razor sharp carbide cutting teeth. The Ball Nose Burr can be used to create concave cuts,...
Customers Also Viewed
Currently Out of Stock

#18 Stainless Steel Nail 5/8"L
Cherry Tree Toys
MSRP:
Now:
$3.49
Was:
#18 Stainless Steel Nail 5/8"L
the #18 Stainless Steel Nail 5/8"L with around type head and are used as a finishing nail. These nails hold better becuase of the way the shank pushes...

#18 x 7/8" Stainless Steel Nail
Cherry Tree Toys
MSRP:
Now:
$3.49
Was:
#18 x 7/8" Stainless Steel Nail
#18 x 7/8" Stainless Steel Nail with around type head and are used as a finishing nail. These nails hold better becuase of the way the shank pushes the wood...

Whirligig Pivot Nail
Cherry Tree Toys
MSRP:
Now:
$1.89
Was:
Get your whirligigs off to the right star. Use a stainless steel pivot nail to set your whirligig on and make it move with the wind. The pivot nail can be attached to a board, deck railing or other...

3" Brass Large Pivot Tube
Cherry Tree Toys
MSRP:
Now:
$2.89
Was:
9/32" O.D. 8/32" I.D. Fits Large Pivot Nail

18 Gauge Brad Nails
Cherry Tree Toys
MSRP:
Now:
$19.95
Was:
18 Gauge Brad Nails
These nails are used with our 18 Gauge Brad nailer. The 18 Gauge Brad nails are used to hold together small pieces such as clocks, boxes, and bird houses.
The Brad Nails...
Currently Out of Stock

Whirligig Brass Pivot Bearing
Cherry Tree Toys
MSRP:
Now:
$5.95
Was:
Looking to add a bit of whimsy to your garden? Check out these Whirligig Brass Pivot Bearings! Sold in packages of 20, these bearings use a solid brass ball bearing to make the whirligig pivot...

Whirligig Brass Propellor Tube
Cherry Tree Toys
MSRP:
Now:
$1.59
Was:
These brass tubes are used inside the propellor hubs as a shaft way to create the spinning of the whirligig. The brass screws are inserted through these and attached to the body of whirligig...

Whirligig Brass Pivot Tube
Cherry Tree Toys
MSRP:
Now:
$1.89
Was:
Use the brass pivot tube inside the pivot block to make your whirligig turn in the wind. The brass tube allows the whirligig to turn freely without binding or wear on the wooden whirligig parts...

Whirligig Brass Wood Screws
Cherry Tree Toys
MSRP:
Now:
$4.49
Was:
#9 Brass Screw
2" longShank length may vary.
Sold in Packages of 6.
Use these screws to attach the whirligig hubs on when creating your whirligig. They fit perfectly inside the whirligig...

Whirligig Brass Washers
Cherry Tree Toys
MSRP:
Now:
$2.95
Was:
Brass Washer .437" outside diameter x .210" iniside diameter
Package of 20
Use these whirligig brass washers to keep your whirligig operating at top capacity.