Foredom Dial Control Kit
- 3.50 LBS
Variable Speed Table Top Control
This control looks the same as our standard table top control but it has a heavy duty plastic housing with dial for precise settings.
This control also has a different style plug that is made to fit the motor’s shielded-type plug. Its solid state control in a plastic housing that can be positioned anywhere on a work surface.
The hand dial is used to adjust and set speed. This manual style control allows you to maintain and return to a desired speed, time and again by marking the setting on the dial.
The control also has a replaceable fuse that protects the electronics during power surges and work overloads. 8.25″ long, 6.5″ wide, 4-5″ high
Foredom H.50 Power Chisel Carver is designed to give a power assist to all your carving projects. The Foredom Handpiece features a rugged plastic barrel and tapered aluminum tip with a unique contoured body design.
The Foredom Handpiece has a "Quick Disconnect" feature which makes it totally easier and faster to interchange handpieces to any Key Tip style Foredom Flex Shaft machine, except heavy duty models. You can use the interchangeable handpiece with a wide variety of shanks increasing versatility suitable for continuous use.
The manufacturer recommends using the power chisel handpiece at low speeds with the 1/3 HP Series TX, and LX motors or 1/6 HP with SR Series motor. Always use in forward rotation only! The reciprocating hammer requires light pressure to engage in the chisel action. The Foredom H.50 Handpiece Power Chisel Carver attaches to any Foredom or Flex Shaft with standard key tip shaft.
The power chisel handpiece is very low maintenance but should be cleaned and lubricated after 200 hours of use. The manufacturer also recommends using the power chisel handpiece with a dial speed control because it's easier to control your speed than the foot pedal.
- #3 x 9 Gouge
- #7 x 8 Gouge
- #11 x 3.5 U Gouge
- 70° x 5.5mm Parting Tool.
- #1 x 9 single Bevel Chisel
- #2 x 9 Single Bevel Chisel
- #3 x 14mm Gouge
- #7x 13mm Gouge
- 70° x 8mm Parting Tool
- #8 x 10mm Deep Gouge
- #1 x 14.5mm Single Bevel Chisel